弹-粘塑性梁的弯曲

给出矩形截面弹 粘塑性梁弯曲问题的求解方程，指出求解该方程的困难     

In-plane bending of a beam resting on a rigid rough foundation

Summary The bending of a finite-length beam that lies on a rigid, rough, flat foundation and interacts with it in accordance to the dry friction law is considered. Loading by bending moments applied at the ends of the beam is studied in detail. The problem is found to be a self-similar one. For small moments, the central part of the beam remains undeflected, and the problem reduces to the solution of an infinite system of algebraic equations. Large moments deflect the entire length of the beam, and the problem partly loses its self-similarity. In this case, the problem reduces to the solution of a successively decreasing number of ordinary differential equations along with some algebraical equations. The solution for the latter case provides initial conditions for the former one. This permits to obtain a solution for any value of the moment. Received 5 November 1996; accepted for publication 27 January 1997     

杂交梁界面剪应力的理论分析和数值模拟

采用解析和数值方法研究FRP-混凝土杂交梁的界面应力问题。提出了杂交梁的新的力学模型和假设,克服了以往的分析模型中界面应力表达式非常复杂和界面应力的解析解与数值解相差较大的缺点,本文得到的FRP板加固梁的界面剪应力表达式与数值结果符合很好,并且具有简捷的表达式。利用有限元法研究了杂交梁各物理参数对界面剪应力的影响。研究表明,界面剪应力在FRP板的端部存在应力集中或应力奇性,这是造成杂交梁界面破坏的主要原因。这项研究对进行杂交结构的工程设计具有理论指导和参考价值。     

轮胎钢丝帘线拉伸力学性能的实验研究

对两种结构类型的钢丝帘线在单向拉伸和循环加载下的力学性能进行了实验研究。结果表明：帘线的结构形式对拉伸力学性能（包括摩擦能量损耗）有显著影响。不考虑载荷很小的情况时，普通结构帘线可近似为弹脆性材料，高伸长结构帘线却可以产生较大的塑性变形；循环载荷下，普通结构帘线几乎没有摩擦能量损耗，而高伸长结构帘线不仅有明显的摩擦能量损耗，而且随着循环应力幅值的增加，摩擦能量损耗呈加速增加的趋势；在循环应力幅值较大时高伸长结构帘线还出现了类似于高温下循环硬化金属材料的循环蠕变现象。文章还讨论了高伸长结构帘线由于塑性变形而引起循环蠕变现象的机理。     

Ozone‐Induced Band Bending on Metal‐Oxide Surfaces Studied under Environmental Conditions

Ozone adsorption and decomposition on metal oxides is of wide interest in technology and in atmospheric chemistry. Here, ozone‐adsorption‐induced band bending is observed on Ti‐ and Fe‐oxide model surfaces under dry and humid conditions. Photoelectron spectroscopic studies indicate the effect of charge transfer to O₃, which limits the surface coverage of the precursor to decomposition reactions. This is also consistent with the negative pressure dependence observed in previous studies. These results contribute to our fundamental understanding of ozone adsorption and decomposition mechanisms on metal oxides of environmental and technological relevance.     

K9光学玻璃化学钢化技术研究

为提高K9光学玻璃在一些特殊应用领域（如高压、温度变化剧烈等）的力学性能,并保证其光学性能符合精密光学仪器要求,对K9光学玻璃进行了化学钢化技术研究。以脆性材料断裂过程微裂纹扩展理论为基础,导出化学钢化玻璃强度应力因子计算模型,分析化学钢化表面应力与表面微裂纹深度、韧性之间的关系,指出化学钢化工艺应注意的事项。通过实验研究,分析化学钢化温度和钢化时间对K9光学玻璃抗弯强度、表面应力及应力层厚度的影响,优化得出K9光学玻璃化学钢化温度为400 ℃、钢化时间为40 h。采用优化工艺,获得了表面应力为500 MPa、应力层厚度为50 μm量级及规格为220 mm×110 mm×22 mm的化学钢化K9光学玻璃样件。钢化后,样件抗弯强度提高了3.5倍以上,且表面疵病、光学鉴别率、透过率等光学性能指标未见明显变化。     

Mechanistic model for deformation of polymer nanocomposite melts under large amplitude shear

We report the mechanical response of a model nanocomposite system of poly(styrene) (PS)-silica to large-amplitude oscillatory shear deformations. Nonlinear behavior of PS nanocomposites is discussed with the changes in particle dispersion upon deformation to provide a complete physical picture of their mechanical properties. The elastic stresses for the particle and polymer are resolved by decomposing the total stress into its purely elastic and viscous components for composites at different strain levels within a cycle of deformation. We propose a mechanistic model which captures the deformation of particles and polymer networks at small and large strains, respectively. We show, for the first time, that chain stretching in a polymer nanocomposite obtained in large amplitude oscillatory deformation is in good agreement with the nonlinear chain deformation theory of polymeric networks. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Annealing effect in glass woven fabric composites,Part II. Bending properties

Effects of annealing on bending properties of composites reinforced with plain glass woven fabrics that were treated with different concentrations of silane coupling agent were investigated in this paper. Bending strength increased by annealing in the specimen treated with lower silane concentration. Higher annealing temperature in a range from 80°C to 150°C led to higher bending strength. Then, the fracture mode changed from a micro-crack type (low strength type) to a branched matrix crack type (high strength type) by annealing.     

Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing

The transverse and longitudinal mechanical properties of aramid fibers like Kevlar? 29 (K29) fibers are strongly linked to their highly oriented structure. Mechanical characterization at the single fiber scale is challenging especially when the diameter is as small as 15 µm. Longitudinal tensile tests on single K29 fibers and single fiber transverse compression test (SFTCT) have been developed. Our approach consists of coupling morphological observations and mechanical experiments with SFTCT analysis by comparing analytical solutions and finite element modeling. New insights on the analysis of the transverse direction response are highlighted. Systematic loading/unloading compression tests enable to experimentally determine a transverse elastic limit. Taking account of the strong anisotropy of the fiber, the transverse mechanical response sheds light on a skin/core architecture. More importantly, results suggest that the skin of the fiber, typically representing a shell of one micrometer in thickness, has a transverse apparent modulus of 0.2 GPa. That is around more than fifteen times lower than the transverse modulus of 3.0 GPa in the core. By comparison, the measured longitudinal modulus is about 84 GPa. The stress distribution in the fiber is explored and the critical areas for damage initiation are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 374–384     

薄板弯曲分析的节点积分高阶无网格法

采用高阶无网格法求解薄板弯曲问题，在已发展的线性曲率光顺方案的基础上，通过引入泰勒展开技术，建立了能够精确再现纯弯曲和线性弯曲模式的节点积分方法。与之相比，目前无网格薄板分析主要采用的节点积分方法仅能精确再现纯弯曲模式。数值结果表明，本文方法可精确通过纯弯曲和线性弯曲试验，且能得到光滑、无振荡的弯矩场。与标准的高斯积分方法和目前已存在的节点积分方法相比，本文方法在计算精度、效率以及弯矩分布等方面均展现出显著优势。